DTC 2702

DTC 2702: GPS Diag: Receiver in Navi ECU

NOTE:
- Before you troubleshoot, make sure to follow the general troubleshooting information.
- Make sure the vehicle is parked outside and away from buildings.
- Check for electronic aftermarket accessories (possibly hidden) mounted near the GPS antenna or the navigation unit.

1. Clear the hard error code.
2. Turn the ignition switch to LOCK (0), and then back to ON (II).
3. Go into the Diagnostic Menu and select the Self-Diagnosis Mode in the Select Diagnosis items menu.
4. Select the System Links, then select the GPS Ant.

Is Receiver in Navi ECU OK indicated?

YES - Intermittent failure, the system is OK at this time.

NO - Replace the navigation unit.