DTC 1402

DTC 1402: Audio Error 2

NOTE:
- Check the vehicle battery condition first.
- Before you troubleshoot, make sure to follow the general troubleshooting information.

1. Clear the hard error code.
2. Turn the ignition switch to LOCK (0), and then back to ON (II).
3. Check for the hard error code.

Is DTC 1402 indicated?

YES - Go into the Self-diagnostic Function in the audio unit, and check CD Error Codes. If the error codes is not indicated, go to Symptom Troubleshooting for the Disc changer.

NO - Intermittent failure, the system is OK at this time.