DTC 66

DTC 66: Control Unit Circuit Stuck OFF

NOTE: If the battery terminal is disconnected and connected repeatedly, five times or more, while the ignition switch is ON (II), DTC 66 may be indicated.

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch ON (II) and OFF at least three times.
4. Check for DTCs with the HDS.
Is DTC 66 indicated?
YES - Replace the servo unit.
NO - Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the servo unit.