DTC 35

DTC 35: NO Solenoid Valve Duty Limit Out
DTC 36: NC Solenoid Valve Duty Limit Out
1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF.
4. Turn the ignition switch ON (II).
5. Do the INCREASING MASTER CYLINDER PRESSURE TEST in the FUNCTION TEST with the HDS.

6. Check for DTCs with the HDS.
Is DTC 35 or 36 indicated?
YES - Replace the servo unit.
NO - Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the servo unit.