DTC 26-25
DTC 25-24: Yaw Rate Sensor Gain HighDTC 25-25: Yaw Rate Sensor Gain Low
DTC 26-24: Lateral Acceleration Sensor Gain High
DTC 26-25: Lateral Acceleration Sensor Gain Low
1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS. Turn the ignition switch OFF, then ON (II) again.
3. Test-drive the vehicle. Drive the vehicle speed at 10 mph (15 km/h) or more.
4. Check for DTCs with the HDS.
Is DTC 25-24, 25-25, 26-24, or 26-25 indicated?
YES - Replace the yaw rate-lateral acceleration sensor.
NO - Intermittent failure, system is OK at this time. Check for poor connections or loose terminals between the yaw rate-lateral acceleration sensor and the VSA modulator-control unit. Refer to intermittent failure.