DTC 107

DTC 107: TCS operation

NOTE: If the ABS/TCS control unit detected this problem, only the TCS activation indicator comes on.

1. Clear the DTC.
2. Test-drive the vehicle.
Does the TCS activation indicator come on, and is DTC 107 indicated?
YES - Leave the vehicle for about 1 hour. And then, test drive the vehicle. If the ABS/TCS/TCS activation indicator indicated, check for loose terminals of the ABS/TCS control unit 47P connector. If necessary, substitute a known-good ABS/TCS modulator-control unit, and recheck.
NO - Intermittent failure; the system is OK at this time.