DTC 41

DTC 41: Wheel Lock
1. Check for brake drag.
Do the brakes drag?
YES - Repair the brake drag.
NO - Go to step 2.





2. Check the installation of the appropriate wheel sensor (see table).
Is it correct?
YES - Go to step 3.
NO - Reinstall the wheel sensor correctly.
3. Lift up the vehicle so all four wheels are off the ground, and release the parking brake.
4. Connect the PGM Tester to the DLC.
5. Choose MISC TEST from the ABS menu, then select function test.
6. Choose the solenoid for the appropriate code (see table), and follow the on screen prompts.
7. Have an assistant attempt to rotate the appropriate wheel for the code, then actuate the solenoid. When the solenoid is actuated, the wheel should rotate and then lock up.
Did the wheel rotate?
YES - The probable cause was that the vehicle spun during cornering. If the problem recurs, check for loose connectors, or try a known-good ABS modulator-control unit.
NO - Check for loose ABS modulator-control unit connectors. If necessary, replace the ABS modulator-control unit.