Removal and Replacement

Engine Mount













Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the engine coolant degas bottle. For additional information, refer to Cooling System.

3. Install the Engine Support Bar to the front and rear engine lifting eyes.





4. Remove the engine mount bracket bolt.
- To install, tighten to 115 Nm (85 lb-ft).

5. Use the Engine Support Bar to raise the engine 25 mm (0.98 in).





6. Remove the bolt and the ground strap from the engine mount bracket.
- Tighten to 10 Nm (89 lb-in).

7. Remove the 3 nuts and the engine mount bracket.
- To install, tighten to 103 Nm (76 lb-ft).

8. Remove the 2 bolts and nut and the engine mount.
- To install, tighten to 55 Nm (41 lb-ft).

9. To install, reverse the removal procedure.