Power Steering Pump Pulley

Power Steering Pump Pulley - 4.6L, 5.4L





4.6L Engine










5.4L Engine









Removal

4.6L engine

1. Remove the air cleaner outlet pipe.

4.6L and 5.4L engines

2. Rotate the tensioner and remove the accessory drive belt from the power steering pump pulley.

3. Using the Power Steering Pump Pulley Remover, remove the pulley.





Installation

4.6L and 5.4L engines

1. NOTICE: Installation of a new power steering pump pulley is necessary after being removed and installed 2 times or pulley and/or pump failure may occur.

Using the Power Steering Pump Pulley Installer, install the pulley.

- Inspect the pulley for paint marks in the web area near the hub. If there are 2 paint marks, install a new pulley. If there is no paint or one paint mark, use a paint pencil to mark the web area of the pulley near the hub.





2. Rotate the tensioner and install the accessory drive belt to the power steering pump pulley.

4.6L engine

3. Install the air cleaner outlet pipe.