Component Tests and General Diagnostics
SPEAKER WALK-AROUND TESTNOTE: To enter the speaker walk-around test or audio control module (ACM) self-diagnostic mode, the audio system must be turned on and in radio turner (AM/FM) mode.
1. To enter the speaker walk-around test, simultaneously press preset buttons 3 and 6.
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1 to 2 seconds. Each speaker is tested and displayed on the front display interface module (FDIM) screen in the following sequence: RF, LF, LR, RR, SUBWOOFER.
3. To exit the speaker walk-around test, turn the key to OFF, turn the audio system off, or press preset button 1 for diagnostics.