Test B: The Horn Is Always On

PINPOINT TEST B: THE HORN IS ALWAYS ON

B1-B6:

Normal Operation
The horn relay receives voltage from the central junction box (CJB) through circuit 30-DA1 (RD). When the horn switch is pressed, ground is provided to the horn relay through circuit 91S-GJ7 (BK/BU), which energizes the horn relay. Voltage is then sent from the horn relay to the horn(s) through circuit 29S-GJ1 (OG/BU).

Possible Causes
- Circuit 29S-GJ1 (OG/BU) short to voltage
- Circuit 91S-GJ7 (BK/BU) short to ground
- Circuit 91S-GL43 (BK/GN) short to ground
- Horn switch
- Clockspring
- Generic electronic module (GEM)
- CJB.