24 - Left Front Valve

Measuring Resistance Of Left Front ABS Valve At Pins 1 And 2:

24-1 - Check Left Front ABS Valve
- Remove the cover from the hydraulic control unit.
- Disconnect the 6-pin connector between the hydraulic control unit and the anti-lock brake control module by pulling up on the plastic hard-shell.
- Measure the resistance of the left front ABS valve at pins 1 and 2 of the valve connector.
- Is resistance between 1.0 and 1.5 ohms?
YES - Go to Pinpoint Test D. D DTC 34, 44 LR Sensor
NO - Replace the hydraulic control unit. Service and Repair