Valve Rocker Arm - Removal

REMOVAL

Special Tools:










1. Remove the cylinder head cover Cylinder Head Cover(s) - Removal.





2. Install Push Rod Retainer (1).





3. Using the sequence shown, loosen the rocker shaft assemblies.

CAUTION: The rocker shaft assemblies are not interchangeable between intake and exhaust. The intake rocker arms are marked with an "I".

4. Remove the rocker shaft assemblies. Note the location for reassembly.

CAUTION: The longer pushrods are for the exhaust side, and the shorter pushrods are for intake side.

5. Remove the pushrods. Note the pushrod location for reassembly.






CAUTION: Do not remove the retainers from the rocker shaft assemblies. The assembly tangs (1) at the bottom of the retainers can be damaged, causing the assembly tangs to break off and get into the engine.