Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Dodge >> 2010 >> Viper SRT-10 V10-8.4L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Stabilizer Bar >> Stabilizer Link >> Service and Repair >> Front Stabilizer Bar Link - Installation

Front Stabilizer Bar Link - Installation






INSTALLATION










1. Install stabilizer bar link (4) into mounting hole on lower control arm (3) and install nut (2). Tighten nut to 23 Nm (17 ft. lbs.).
2. Install end of stabilizer bar (5) onto stabilizer bar link (4) and install nut (1). Tighten nut to 23 Nm (17 ft. lbs.).

3. Install wheel and tire assembly Tires and Wheels - Installation. Progressively tighten wheel mounting nuts in proper sequence to 135 Nm (100 ft. lbs.).
4. Lower vehicle.
pro multis · About Operation CHARM