Vibration Damper - Removal

REMOVAL





1. Raise vehicle on hoist.
2. Remove left and right engine mount isolator to frame nuts (2).
3. Lower vehicle.





4. Remove air cleaner housing (1) Air Cleaner Body - Removal.
5. Remove accessory drive belt Serpentine Accessory Drive Belt - Removal.





6. Remove crankshaft pulley.
7. Support engine with floor jack and wooden block on oil pan. Raise engine with floor jack enough to allow removal of crankshaft damper.
8. Remove crankshaft damper bolt.
9. Install crankshaft insert 8194 (1). Lubricate the end of crankshaft insert 8194 with wheel bearing grease or equivalent.






NOTE: Lubricate the threads of the puller using Mopar(R) Nickel Anti-seize Compound or equivalent, before beginning crankshaft damper removal.

NOTE: Make sure puller bolts fully engage threads on damper.

10. Using a bolt-grip type universal puller (1), remove the crankshaft damper.