Wiper Motor - Removal

REMOVAL





1. Remove the wiper module. Wiper Arm Linkage - Removal.

CAUTION: Do not remove nut and bell crank from the wiper motor. A timing issue will result upon reinstall. The new motor comes with a new bell crank installed.

2. Using a pry bar, flat bladed screwdriver, or equivalent, gently pry the linkage (1) from the bellcrank.
3. Using a trim stick or equivalent, gently pry the electrical connector (2) from the module mounting arm.
4. Remove mounting bolts (3) from wiper motor and twist motor out of module.