Generator - Removal

REMOVAL










CAUTION: Disconnect the negative battery cable before removing the battery output wire from generator. Failure to do so can result in injury or damage to electrical system.

1. Disconnect and isolate negative battery cable at battery.
2. Remove air cleaner assembly, refer to Air Cleaner Body - Removal.
3. Remove generator drive belt, refer to Serpentine Accessory Drive Belt - Removal.
4. Remove the upper mounting bolt (1).
5. Remove the lower mounting bolt (2) and nut.





6. Unsnap plastic protective cover (1) from B+ mounting stud.
7. Remove B+ terminal mounting nut (2) and B+ terminal (3) from generator.
8. Disconnect field wire electrical connector (4) by pushing on connector tab.





9. Remove generator from vehicle.