Water Pump - Installation

INSTALLATION










CAUTION: Do not use a metal scraper to clean aluminum sealing surfaces, as damage to surfaces may occur. Use only a plastic scraper and Mopar(R) Brake Parts Cleaner or the equivalent

1. Clean both sealing surfaces using a plastic scraper and Mopar(R) Brake Parts Cleaner or the equivalent. Take care not to scratch or gouge sealing surfaces.
2. Install new water pump gasket.
3. Install pump to chain case cover.





4. Tighten water pump bolts in the sequence 11 Nm (95 in. lbs.).
5. Rotate the water pump by hand to check for freedom of movement.
6. Install the accessory drive belt Serpentine Accessory Drive Belt - Installation.
7. Install air cleaner housing assembly, connect throttle body air inlet hose.
8. Evacuate air and refill cooling system. Water Pump - Coolant Air Evacuation
9. Check cooling system for leaks. Component Tests and General Diagnostics