Seat Cushion Cover - Installation

INSTALLATION





1. Install the cover onto the seat cushion foam (2) and install new hog rings.
2. Place the cushion/cover onto the cushion frame and connect the j-straps (4).
3. Position the seat back assembly into place and clip the recliner cable (1) to the frame.
4. Install the seat adjuster. Seat Adjuster - Installation.

WARNING: Do not connect the battery negative cable Component Tests and General Diagnostics . Serious or fatal injury may result if the system test is not performed first.

5. Place battery access cover into place and install four bolts.
6. Close deck lid.