Rear Stabilizer Bar Bushings - Installation

INSTALLATION





1. Thoroughly clean stabilizer bar in area of bushing contact. Install each NEW bushing on stabilizer bar by opening slit in bushing and wrapping it around stabilizer bar, positioning it against retainer ring on bar.
2. Slide bushing retainers over bushings.
3. Position bushing retainers against frame rails, then install four retainer bolts. Tighten four stabilizer bar (1) bushing retainer bolts to 91 Nm (67 ft. lbs.).
4. Install wheel and tire assemblies Tires and Wheels - Installation. Progressively tighten wheel mounting nuts in proper sequence to 135 Nm (100 ft. lbs.).
5. Lower vehicle.