Power Steering Pump - Removal

REMOVAL

NOTE: Review all Warnings and Cautions. Service Precautions.

CAUTION: Cap all open ends of power steering hoses, power steering pump fittings and steering gear ports when disconnected. This will prevent the entry of foreign material into the components during servicing.

1. Disconnect negative (-) cable from battery and isolate cable.
2. Remove air cleaner housing. Air Cleaner Housing - Removal
3. Siphon power steering fluid from fluid reservoir.
4. Remove accessory drive belt from belt tensioner and power steering pump drive pulley. Accessory Drive Belt - Removal




5. Unthread tube nut and remove power steering pressure hose (2) from power steering pump (1) pressure fitting. Drain excess power steering fluid from line.




6. Remove supply hose (2) at power steering pump (1).




7. Remove three bolts (1) mounting power steering pump (2) to engine.
8. Remove power steering pump (2).
9. If pulley needs to be removed, Power Steering Pump Pulley - Removal