Instrument Panel Cluster Bezel - Removal

REMOVAL

WARNING: Follow all Warnings for airbag component service Service Precautions.

1. Open deck lid.
2. Remove four bolts to battery compartment cover and remove cover.
3. Disconnect and isolate the battery negative cable.
4. Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or instrument panel component service.
5. Remove the center bezel. Instrument Panel Center Bezel - Removal
6. Remove eight screws and slide the tunnel console back to get enough room to remove the bezel. Center Console - Removal
7. Remove the steering column cover. Steering Column Opening Cover - Removal
8. Using a trim stick C-4755 or equivalent, remove the left speaker cover.
9. Remove the three screws along the bottom edge of the bezel next to the steering column.
10. Using a trim stick C-4755 or equivalent, gently pry out on cluster bezel.