Vibration Damper - Installation

INSTALLATION





NOTE: Lubricate the threads of Crankshaft Damper Installer 9943 (2) using Mopar(R) Nickel Anti-seize Compound or equivalent, before beginning crankshaft damper installation.

1. Install crankshaft damper (1) using Crankshaft Damper Installer 9943 (2).
2. Install and tighten damper bolt to 176 Nm (130 ft. lbs.).
3. Install the crankshaft pulley. Tighten crankshaft pulley bolts to 23 Nm (200 in. lbs.).




4. Lower engine with floor jack while guiding engine mount studs (1) into frame slots.
5. Install accessory drive belt Accessory Drive Belt - Installation.
6. Install air cleaner housing Air Cleaner Housing - Installation.
7. Raise vehicle on hoist.
8. Install engine mount isolator nut (2). Tighten nut to 102 Nm (75 ft. lbs.).
9. Lower vehicle.