Intake Manifold - Removal

REMOVAL





1. Remove engine covers (1).
2. Bleed fuel system . Fuel Pressure Release
3. Disconnect negative cable from battery.
4. Remove air inlet hose.
5. Disconnect electrical connectors for the following components:
- Manifold Absolute Pressure (MAP) Sensor
- Fuel Injectors
- ETC ( Electric Throttle Control )

6. Disconnect brake booster hose, purge hose, and MUA hose ( Make Up Air Hose ).
7. Remove intake manifold retaining fasteners in a crisscross pattern starting from the outside bolts and ending at the middle bolts.
8. Remove intake manifold as an assembly.