Cylinder Head Assembly: Specifications
CYLINDER HEADGasket Thickness (Compressed) 1.78 mm (1 0.059 inch)
Cylinder head must be flat within:
Standard dimension less than 0.05 mm (0.002 inch)
Service Limit 0.2 mm (0.008 inch)
Grinding Limit Maximum of 0.2 mm (0.008 inch) is permitted.
0.20 mm (0.008 inch) MAX is a combined total dimension of the stock removal limit from cylinder head and block top surface (Deck) together.
Cylinder Head Bolts
Step 1 61 Nm (45 ft. lbs.)
Step 2 88 Nm (65 ft. lbs.)
Step 3 88 Nm (65 ft. lbs.)
Step 4 + 90 degree turn
The bolts must be examined BEFORE reuse. If the threads are necked down the bolts must be replaced.
Camshaft Sprocket Bolt - Right Side 102 Nm +1/4 Turn (75 ft. lbs. +1/4 Turn)
Camshaft Sprocket Bolt - Left Side 102 Nm +1/4 Turn (75 ft. lbs. +1/4 Turn)
Exhaust Manifold to Cylinder Head - Bolts 23 Nm (200 inch lbs.)
Starting at the center working outward.
Intake Manifold - Lower 28 Nm (250 inch lbs.)