Powertrain Verification Test - Ver 1
POWERTRAIN VERIFICATION TEST VER-1Applicability - All
1. Inspect the vehicle to ensure that all engine components are properly installed and connected. Reassemble and reconnect components as necessary.
2. Inspect the engine oil for contamination. If it is contaminated, change the oil and filter.
3. Perform steps 4 through 6 if the PCM has been replaced, then proceed with the verification. If the PCM has not been replaced, skip those steps and continue verification.
4. If the PCM has been changed and the correct VIN and mileage have not been programmed, a DTC will be set in the ABS and Airbag modules.
5. For ABS and Airbag systems: Enter correct VIN and Mileage in PCM. Erase codes in ABS and Airbag modules.
7. Attempt to start the engine.
8. If the engine is unable to start, look for any Technical Service Bulletins that may relate to this condition. Return to Symptom List if necessary.
9. If the engine starts and stays running, the repair is now complete.