Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Help 6: Removal of Shorting Bar

NOTE: Before removing the shorting bar, notice the orientation of it within the connector so it can be replaced the same way.

To remove the shorting bar from the connector, insert a small pointed tool (such as the end of a paperclip) into the little hole in the bar. The hole is accessed through the opening of the connector. Using the tool as a lever, pull the shorting bar out of the connector.

To replace the shorting bar, insert it with the folded edge last into the opening of the connector. Push it firmly until it snaps into place.