Evaporative Emission Line Replacement - Engine

Evaporative Emission Line Replacement - Engine

Removal Procedure





1. Remove the engine cover. Refer to Engine Cover Replacement Service and Repair.

2. Clean the evaporative emission (EVAP) pipe connections and the surrounding areas before disconnecting in order to avoid possible contamination of the EVAP system.

3. Disconnect the EVAP pipe quick connect fitting from the chassis EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service Service and Repair.

4. Disconnect the EVAP pipe quick connect fitting from the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service Service and Repair.

5. Remove the EVAP pipe (1) from the vehicle.

6. Cap the EVAP canister purge valve and the chassis EVAP pipe in order to prevent possible EVAP system contamination.

Installation Procedure





1. Remove the caps from the EVAP canister purge valve and the chassis EVAP pipe.

2. Connect the EVAP pipe (1) quick connect fitting to the EVAP canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service Service and Repair.

3. Connect the EVAP pipe (1) quick connect fitting to the chassis EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service Service and Repair.

4. Install the engine cover. Refer to Engine Cover Replacement Service and Repair.