Auxiliary Generator Replacement (6.6L)

Auxiliary Generator Replacement (6.6L)

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Service Precautions).

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary Battery) (Service and Repair).
2. Remove the drive belt. Refer to Drive Belt Replacement (Service and Repair).
3. Disconnect the engine wiring harness electrical connector (1) from the generator.
4. Reposition the engine wiring harness boot (4) in order to access the terminal stud.
5. Remove the engine wiring harness nut (3).
6. Remove the engine wiring harness terminal (2) from the generator.




7. Remove the generator bolts (1).
8. Remove the generator.

Installation Procedure




1. Install the generator.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the generator bolts (1).

Tighten the bolts to 50 Nm (37 lb ft).




3. Install the engine wiring harness terminal (2) to the generator.
4. Install the engine wiring harness nut (3).

Tighten the nut to 9 Nm (80 lb in).

5. Position the engine wiring harness boot (4) in order to cover the terminal stud.
6. Connect the engine wiring harness electrical connector (1) to the generator.
7. Install the drive belt. Refer to Drive Belt Replacement (Service and Repair).
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary Battery) (Service and Repair).