Fuel Injection Fuel Feed Front Pipe Replacement - Right Side

Fuel Injection Fuel Feed Front Pipe Replacement - Right Side

Removal Procedure




1. Remove the fuel feed pipe. Refer to Fuel Feed Pipe Replacement ().
2. Remove the exhaust gas recirculation (EGR) valve cooler. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (Exhaust Gas Recirculation Valve Cooler Replacement).

Note: Engine wiring harness shown removed for clarity.

3. Remove the fuel rail fuel feed pipe clamp bolts (2 and 3) and upper clamps.
4. Loosen the fuel rail fuel feed pipe fitting (1) at the left fuel rail.
5. Loosen the fuel rail fuel feed pipe fitting (4) at the right fuel rail.




6. Remove the right fuel rail fuel feed pipe.

Installation Procedure




1. Position and install the right fuel rail fuel feed pipe.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the fuel rail fuel feed pipe upper clamps and bolts (2 and 3).

Tighten the bolts to 24 Nm (18 lb ft).

3. Tighten the fuel rail fuel feed pipe fitting (4) at the right fuel rail.

Tighten the fitting to 41 Nm (30 lb ft).

4. Tighten the fuel rail fuel feed pipe fitting (1) at the left fuel rail.

Tighten the fitting to 41 Nm (30 lb ft).

5. Install the EGR valve cooler. Refer to Exhaust Gas Recirculation Valve Cooler Replacement (Exhaust Gas Recirculation Valve Cooler Replacement).
6. Install the fuel feed pipe. Refer to Fuel Feed Pipe Replacement ().
7. Prime the fuel system. Refer to Fuel System Priming (Fuel System Priming).
8. Start the engine. If the engine stalls, repeat the above step.
9. Once the engine starts, inspect for fuel leaks.