Differential Oil Replacement (9.5LD Inch Axle)

Differential Oil Replacement (9.5LD Inch Axle)

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the drain plug.




3. Remove the fill plug.



Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution) .
1. Install the drain plug and tighten to 33 Nm (24 lb ft) .
2. Fill the rear drive axle.

* Use the proper fluid, refer toApproximate Fluid Capacities .
* For the proper capacity, refer toFluid and Lubricant Recommendations .





3. Install the fill plug and tighten to 33 Nm (24 lb ft) .
4. Remove the support and lower the vehicle.