Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove both front tires and wheels. Refer to Tire and Wheel Removal and Installation (Service and Repair).




3. If equipped with AWD, disconnect the stabilizer links from the stabilizer shaft.
4. If equipped with AWD, swing the stabilizer shaft upwards in order to gain additional clearance.




5. Remove the transmission mount-to-bracket through bolt.
6. Remove the transmission mount-to-frame bolts.
7. Remove the transmission mount from the vehicle.

Installation Procedure

1. Position the transmission mount to the frame.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the transmission mount-to-frame bolts and tighten to 50 Nm (37 lb ft).
3. Install the transmission mount-to-bracket through bolt, while aligning the transmission mount to the bracket.
Tighten the bolt to 110 Nm (81 lb ft).




4. If equipped with AWD, lower the stabilizer shaft and connect the stabilizer links.
Tighten the stabilizer link nuts to 65 Nm (48 lb ft).
5. Install both front tires and wheels. Refer to Tire and Wheel Removal and Installation (Service and Repair).
6. Lower the vehicle.