Seat Belt Retractor Pretensioner Replacement - Right Front

Seat Belt Retractor Pretensioner Replacement - Right Front

Removal Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).




2. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
3. Remove the front seat belt anchor from the rear outboard stud.




4. Open the seat belt guide loop cover.
5. Remove the nut from seat belt guide loop.




6. Remove the seat belt guide loop from the guide adjuster bracket.




7. Remove the center pillar lower trim. Refer to Center Pillar Lower Trim Panel Replacement (Service and Repair).
8. Remove the bolt from the seat belt retractor.




9. Remove the seat belt retractor from the center pillar.
10. Remove the front seat belt from the vehicle.

Installation Procedure




1. Install the seat belt retractor to the center pillar.





Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the bolt to the seat belt retractor.

Tighten the bolt to 42 N.m (31 lb ft).

3. Install the center pillar lower trim. Refer to Center Pillar Lower Trim Panel Replacement (Service and Repair).




4. Place the seat belt guide loop to the guide adjuster bracket.




5. Install the nut to the seat belt guide loop.

Tighten the nut to 42 N.m (31 lb ft).

6. Install the seat belt guide loop cover.




7. Place the seat belt anchor plate to the seat rear outboard stud.
8. Install the front bucket seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
9. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).