Fuel Filler Neck: Service and Repair

Fuel Tank Filler Pipe Housing Replacement

Removal Procedure




1. Open the fuel filler door.
2. Remove the fuel cap.
3. Remove the screws (3, 4) securing the fuel filler pocket (1) to the left rear inner body panel (2).
4. Remove the screws from the fuel filler pocket.
5. Remove the push-pin retainer from the inner wheel well to pocket.
6. Remove the fuel filler pocket (1) from the vehicle.
7. Depress tabs on the fuel cap tether and remove from the fuel filler pocket.

Installation Procedure




1. Align the fuel filler pocket (1) to the body panel (2).

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the screws (3, 4) to the fuel filler pocket to the left body panel.

Tighten the screws to 10 N.m (89 lb in).

3. Install the push in retainer to the fuel filler pocket.
4. Install the fuel cap to the fuel filler pocket.
5. Close the fuel filler door.