Grille Applique Molding Replacement - Upper (Molding Assembly)

Grille Applique Molding Replacement - Upper (Molding Assembly)

Removal Procedure

1. Open the hood.




2. Remove the fasteners from the grille brackets.
3. Use a flat-bladed tool to release the hook and loop from the grille applique molding.




4. Remove the grille applique molding by pulling toward the front of the vehicle.



Installation Procedure

1. Install the grille applique molding by aligning the retaining tabs on the molding with the grille brackets.




2. Press the molding into place.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the fasteners to the grille bracket.
4. Tighten the fasteners.

Tighten the fasteners to 2.5 N.m (22 lb in).

5. Close the hood.