Cowl Moulding / Trim: Service and Repair

Air Inlet Grille Panel Replacement

Removal Procedure

1. Remove the wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.




2. Remove the right side air inlet grille push-in retainers.
3. Remove the right side air inlet grille from the vehicle.
4. Remove the left side air inlet grille push-in retainers.
5. Lift up the left side air inlet grille and disconnect the front washer nozzle hose from the front nozzles.
6. Depress the nozzle retaining tabs on the under side of the air inlet grille and pull front nozzles up.
7. Remove the left side air inlet grille.



Installation Procedure





1. Install the front washer nozzles into the air inlet grille.
2. Connect the washer nozzle hose to the front washer nozzles.
3. Install the left side air inlet grille.
4. Install the right side air inlet grille.
5. Install the push-in retainers.
6. Install the wiper arms. Refer to Wiper Arm Replacement in Wipers/Washer Systems.