Seat Switch Bezel Replacement

Seat Switch Bezel Replacement

Removal Procedure

1. Remove the seat from the vehicle. Refer to Seat Replacement (Seat Replacement) .
2. Remove the seat cushion outer trim panel from the seat assembly. Refer to Seat Cushion Outer Trim Panel Replacement (Seat Cushion Outer Trim Panel Replacement) .




3. Remove the 3 screws that retain the switch bezel to the seat.
4. Remove the seat switch from the switch bezel by releasing the retaining tabs Refer to Seat Switch Replacement - Power () .
5. Remove the heated seat switch from the switch bezel by releasing the retaining tabs. Refer to Heated Seat Switch Replacement - Front (Removal and Replacement) .
6. Remove the switch bezel from the seat .



Installation Procedure

1. Install the heated seat switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Heated Seat Switch Replacement - Front (Removal and Replacement) .
2. Install the seat switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Seat Switch Replacement - Power () .





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the switch bezel to the seat with the 3 screws.

Tighten the seat switch bezel screws to 1.5 N.m (13 lb in).

4. Install the seat cushion outer trim panel to the seat assembly. Refer to Seat Cushion Outer Trim Panel Replacement (Seat Cushion Outer Trim Panel Replacement) .
5. Install the seat in the vehicle. Refer to Seat Replacement (Seat Replacement) .