Lock Replacement - Door

Lock Replacement - Door

Removal Procedure

1. Lower the window.
2. Remove the trim panel. Refer to Trim Panel Replacement - Door Trim Panel Replacement - Door.
3. Remove the water deflector. Refer to Water Deflector Replacement - Door Water Deflector Replacement - Door.




4. Remove the screws holding the assembly to the door.
5. Remove the lower run channel bolt.
6. Loosen the upper run channel bolt.
7. Remove the inner mounting panel and glass assembly. Refer to Door Mounting Panel Replacement - Inner Door Mounting Panel Replacement - Inner.




8. Remove the two bolts (7) from the door handle.
9. Remove the door handle. Refer to Door Handle Replacement - Outside Service and Repair.
10. Remove the pressure relief valve from the edge of the door.




11. Remove the three lock assembly to the door bolts (1).
12. Remove the lock rods from the door.

Installation Procedure





Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the lock (5) and lock rods (4) into the door and attach with 3 bolts.

Tighten the lock assembly to door bolts to 7 Nm (62 lb in).

2. Install the pressure relief valve to the edge of the door.




3. Install the outside door handle (1) to the door with 2 bolts.

Tighten the bolts to 4 Nm (35 lb in).

4. Install the inner mounting panel and glass assembly. Refer to Door Mounting Panel Replacement - Inner Door Mounting Panel Replacement - Inner.
5. Attach the lock rods to the back of the inner mounting panel.
6. Install the lower run channel bolt, and tighten the top run channel bolt.
7. Install the inner mounting panel assembly to the door with screws.
8. Install the water deflector. Refer to Water Deflector Replacement - Door Water Deflector Replacement - Door.
9. Install the trim panel. Refer to Trim Panel Replacement - Door Trim Panel Replacement - Door.