Trim Replacement - Third Pillar Left

Trim Replacement - Third Pillar Left

Tools Required

J 38778 Door Pad Trim and Garnish Clip Remover


Removal Procedure

1. Remove the seat belt upper mount. Refer to Shoulder Belt Guide Adjuster Replacement - Front in Seat Belts.
2. Remove the retaining screw.




3. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.



Installation Procedure





1. Install the panel to the vehicle:

1. Align the retaining clips with the holes in the body.
2. Press the panel in order to seat the fasteners into place.


Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the retaining screw.

Tighten the retaining screw to 2 N.m (18 lb in).

3. Install the seat belt upper mount. Refer to Shoulder Belt Guide Adjuster Replacement - Front in Seat Belts.