Heater Case/Cover Replacement

REMOVAL PROCEDURE




1. Remove the right instrument panel insulator.
2. Remove the left instrument panel insulator.
3. Remove the lower center console.
4. Remove the console bracket.
5. Remove the floor duct brace
6. Remove the floor duct
7. Remove the screws retaining the heater core outlet cover.
8. Remove the heater core outlet cover.




9. Remove the screws retaining the heater core cover.
10. Remove the heater core cover.

INSTALLATION PROCEDURE




1. Install the heater core cover.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the heater core cover retaining screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).




3. Install the heater core outlet cover.
4. Install the heater core outlet cover retaining screws.

Tighten
Tighten the screws to 1.6 N.m (14 lb in).

5. Install the floor duct.
6. Install the floor duct brace.
7. Install the floor duct brace retaining nuts.

Tighten
Tighten the nuts to 10 N.m (89 lb in).

8. Install the console bracket.
9. Install the lower center console.
10. Install the left instrument panel insulator.
11. Install the right instrument panel insulator.