Information Bus
Description and Operation
Testing and Inspection- Initial Inspection and Diagnostic Overview
- Reading and Clearing Diagnostic Trouble Codes
- Symptom Related Diagnostic Procedures
- Scan Tool Testing and Procedures
- Data Link Connector Diagnosis
- Serial Data Communications
- Class 2 Serial Data
- Data Link Connector (DLC)
- DTC Modes
- Overview
- DTC Info Mode
- DTC Status
- Specific DTC Mode
- History
- History DTC
- MIL Request
- MIL Requested
- Last Test Fail
- Failed Last Test
- Not Run SCC (Not Run Since Code Clear)
- Not Run Since CI (Not Run Since Cleared)
- Test Fail SCC (Test Failed Since Code Clear)
- Failed Since Clear
- Fail This Ign. (Fail This Ignition)
- Failed This Ign. (Failed This Ignition)
- Test Ran and Passed
- Intermittent Malfunction Indicator Lamp
- Malfunction Indicator Lamp (MIL)
- Reprogramming (Flashing) the Control Module
- The Diagnostic Executive
Locations