Center Pillar Garnish Molding Replacement - Left Side

Center Pillar Garnish Molding Replacement - Left Side

Removal Procedure

1. Remove the retaining screw from the garnish molding.
2. Remove the driver's side seat belt upper mounting bolt. Refer to Front Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.




3. Pull back on the garnish molding in order to release the fasteners.
4. Remove the garnish molding from the pillar.



Installation Procedure





1. Install the garnish molding to the pillar:

1. Align the locator pin with the pillar.
2. Press the locator pin firmly into place, seating all fasteners.

2. Install the driver's seat belt upper mounting bolt. Refer toFront Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.

Notice: Refer toFastener Notice in Cautions and Notices.

3. Install the garnish molding retaining screw.

Tighten the garnish molding retaining screw to 2 N.m (18 lb in).