Front Suspension

Stabilizer Shaft Link Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Remove the stabilizer shaft link nuts.
4. Remove the stabilizer shaft link from the stabilizer shaft and lower control arm.

Installation Procedure




1. Install the stabilizer shaft link into the stabilizer shaft and lower control arm.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the stabilizer shaft link nuts and tighten to 76 Nm (56 lb ft).
3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Service and Repair).
4. Lower the vehicle.