Rear Side Door Window Stop Bumper Replacement

Rear Side Door Window Stop Bumper Replacement

Removal Procedure

1. Pull the rear window run channel weatherstrip halfway down.




2. Remove the rear window stop bumper screw.
3. Remove the rear window stop bumper.

Installation Procedure




1. Install the rear window stop bumper.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear window stop bumper screw.

Tighten the rear window stop bumper screw to 4 Nm (35 lb in).

3. Push the rear window run channel weatherstrip into place.