Rear Side Door Window Inner Sealing Strip Replacement

Rear Side Door Window Inner Sealing Strip Replacement

Removal Procedure

1. Lower the window to the bottom of the door.
2. Remove the trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair




3. Lift up on the rear edge of the inner belt sealing strip in order to remove.

Installation Procedure




1. Install the sealing strip:

1. Start at the rear edge.
2. Press firmly onto the flange.
3. Seat the strip using a rubber mallet.

2. Install the trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair
3. Raise the window.