Sunroof / Moonroof Windguard: Service and Repair

Brush Cover Replacement

Removal Procedure

1. Slide the sunshade to the fully open position.
2. Open the sunroof glass panel halfway.




3. Remove the screws from the front edge of the brush cover.
4. Unclip the brush cover from both rear corners.
5. Open the sunroof glass panel all the way.
6. Remove the brush cover through the sunroof glass panel opening.

Installation Procedure

1. Install the brush cover through the sunroof glass panel opening.
2. Close the sunroof glass panel half way.
3. Clip the brush cover to both rear corners.





Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the brush cover screws to the front edge of the brush cover.

Tighten the brush cover screws to 2 Nm (18 lb in).

5. Close the sunroof glass panel.
6. Close the sunscreen.