Engine Mount Strut Replacement - Right Side

Engine Mount Strut Replacement - Right Side

Removal Procedure




1. Remove the surge tank nuts and push pin retainer.
2. Remove the surge tank from the studs and position the tank aside.




3. Remove the engine mount strut brace nut.




4. Remove the engine mount strut bolt.
5. Remove the engine mount strut.

Installation Procedure




1. Install the engine mount strut.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the engine mount strut bolt.

Tighten the bolt to 70 Nm (52 lb ft).




3. Install the engine mount strut nut.

Tighten the nut to 70 Nm (52 lb ft).




4. Position the surge tank to the studs.
5. Install the surge tank nuts and push pin retainer.

Tighten the nuts to 6 Nm (53 lb in).