Front Bumper Fascia Replacement

Front Bumper Fascia Replacement












2.Remove the front retainers from the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement Front Wheelhouse Liner Replacement

3.Remove the front air deflector. Refer to Front Air Deflector Replacement

1Front Fascia Bolt (Qty: 2)
Caution:Refer to Fastener Caution .

Procedure
Access the bolt through the wheel opening.
Tighten10 N �m (89 lb in)

2Front Fascia Nut (Qty: 2)

Procedure
Access the nut through the wheel opening. Loosen nut to allow stud to slide in keyhole slot in the fender flange.
Tighten10 N �m (89 lb in)

3Front Fascia Retainer (Qty: 2)

4Front Fascia Retainer (Qty: 2)

5Front Fascia

Procedure

1.Disconnect the fog lamp electrical connectors.

2.Disconnect air baffle

3.Pull out on the fascia to release the tabs on the energy absorber to the impact bar.

4.Energy absorber is attached to the front fascia.

5.With an assistant, pull fascia forward to disengage front fascia reinforcements under headlamps and allow extraction of studs from keyhole slots in the fenders.

6.Transfer parts as needed.

Note:The fascia grille is removed with the front fascia.