Front Suspension

Stabilizer Shaft Link Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the front wheels and tires. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Remove the stabilizer shaft link bolt.




4. Remove the stabilizer shaft insulators and spacers.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Loosely install the stabilizer link components.

Tighten the stabilizer link nuts to 17 Nm (13 lb ft).

2. Install the front wheels and tires. Refer to Tire and Wheel Removal and Installation (Service and Repair).
3. Lower the vehicle.