Front Suspension

Stabilizer Shaft Insulator Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the stabilizer shaft bracket bolts.
3. Remove the stabilizer shaft bracket.
4. Using a pry bar, lift upwards on the stabilizer shaft and remove the stabilizer shaft insulator.

Installation Procedure




1. Using a pry bar, lift up on the stabilizer shaft and install the stabilizer shaft insulator.
2. Install the stabilizer shaft bracket.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the stabilizer shaft bracket bolts.

Tighten the stabilizer shaft bracket bolts to 50 Nm (37 lb ft).

4. Lower the vehicle.